[DEFAULT]


[advanced_vm]

#
# From tobiko
#

# Default advanced_vm image name (string value)
#image_name = <None>

# Default advanced_vm image URL. A local path could be defined. Example:
# file:///tmp/cirros.img (string value)
#image_url = <None>

# Default advanced_vm container format (string value)
#container_format = <None>

# Default advanced_vm disk format (string value)
#disk_format = <None>

# Default advanced_vm username (string value)
#username = <None>

# Default advanced_vm password (string value)
#password = <None>

# Default advanced_vm SSH connection timeout (seconds) (floating point value)
#connection_timeout = <None>

# Allow to disable SSH auth algorithmsin order to SSH to old servers likeCirrOS ones
# (dict value)
#disabled_algorithms = <None>


[ansible]

#
# From tobiko
#

# Default Ansible inventory files (list value)
#inventory_files = /etc/ansible/hosts

# Default Ansible playbook verbosity (integer value)
#verbosity = <None>


[cirros]

#
# From tobiko
#

# Default cirros image name (string value)
#image_name = <None>

# Default cirros image URL. A local path could be defined. Example:
# file:///tmp/cirros.img (string value)
#image_url = <None>

# Default cirros container format (string value)
#container_format = <None>

# Default cirros disk format (string value)
#disk_format = <None>

# Default cirros username (string value)
#username = <None>

# Default cirros password (string value)
#password = <None>

# Default cirros SSH connection timeout (seconds) (floating point value)
#connection_timeout = <None>

# Allow to disable SSH auth algorithmsin order to SSH to old servers likeCirrOS ones
# (dict value)
#disabled_algorithms = <None>


[common]

#
# From tobiko
#

# Directory where to look for shelves. (string value)
#shelves_dir = ~/.tobiko/cache/shelves

# Directory where lock persistent files will be saved (string value)
#lock_dir = ~/.tobiko/cache/lock


[glance]

#
# From tobiko
#

# Default directory where to look for image files (string value)
#image_dir = ~/.tobiko/cache/glance/images


[http]

#
# From tobiko
#

# HTTP proxy URL for Rest APIs (string value)
#http_proxy = <None>

# HTTPS proxy URL for Rest APIs (string value)
#https_proxy = <None>

# Don't use proxy server to connect to listed hosts (string value)
#no_proxy = <None>


[iperf3]

#
# From tobiko
#

# Port number (integer value)
#port = <None>

# tcp and udp values are supported (string value)
# Possible values:
# tcp - <No description provided>
# udp - <No description provided>
#protocol = <None>

# target bit rate (integer value)
#bitrate = 20000000

# direction download (True) or upload (False) (boolean value)
#download = <None>

# timeout of the iperf test (integer value)
#timeout = 10


[keystone]

#
# From tobiko
#

# Identity API version (integer value)
#api_version = <None>

# Identity service URL (string value)
#auth_url = <None>

# Username (string value)
#username = <None>

# Project name (string value)
#project_name = <None>

# Password (string value)
#password = <None>

# Domain name (string value)
#domain_name = <None>

# User domain name (string value)
#user_domain_name = <None>

# Project domain name (string value)
#project_domain_name = <None>

# Project domain ID (string value)
#project_domain_id = <None>

# Trust ID for trust scoping. (string value)
#trust_id = <None>

# Cloud name used pick authentication parameters from clouds.* (string value)
#cloud_name = <None>

# Host login from where to search for clouds file (list value)
#clouds_file_hosts = localhost

# Directories where to look for clouds files (list value)
#clouds_file_dirs = .,~/.config/openstack,/etc/openstack

# Clouds file names (list value)
#clouds_file_names = clouds.yaml,clouds.yml,clouds.json

# default value in case keystone interface is needed (string value)
#interface = <None>


[manila]

#
# From tobiko
#

# Share protocol (string value)
#share_protocol = nfs

# Default size in GB for shares created by share tests. (integer value)
#size = 1

# Default share type's name (string value)
#default_share_type_name = default

# Specifies whether the driver handles the share servers or not (boolean value)
#spec_driver_handles_share_servers = false


[neutron]

#
# From tobiko
#

# Network for creating ports on an external network (string value)
#external_network = public

# The CIDR block to allocate IPv4 subnets from (string value)
#ipv4_cidr = 10.100.0.0/16

# The mask bits for IPv4 subnets (integer value)
#ipv4_prefixlen = 24

# List of nameservers IPv4 addresses (list value)
#ipv4_dns_nameservers = <None>

# The CIDR block to allocate IPv6 subnets from (string value)
#ipv6_cidr = fc00::/48

# The mask bits for IPv6 subnets (integer value)
#ipv6_prefixlen = 64

# List of nameservers IPv6 addresses (list value)
#ipv6_dns_nameservers = <None>

# Customized maximum transfer unit size
# Notes:
#  - MTU values as small as 1000 has been seen breaking networking binding due to an
# unknown cause.
#  - Too big MTU values (like greater than 1400) may be refused during network creation
# (integer value)
#custom_mtu_size = 1300

# Host where nameservers files are located (string value)
#nameservers_host = <None>

# File to parse for getting default nameservers list (list value)
#nameservers_filenames = /etc/resolv.conf

# The BW limit value configured for the QoS Policy Rule (integer value)
#bwlimit_kbps = 1000

# The direction for the QoS Policy Rule (string value)
#direction = egress

# The DSCP marking value for the QoS Policy Rule (integer value)
#dscp_mark = 40

# VLAN trunk subport segmentation ID (integer value)
#vlan_id = 101

# Behave as these networking extensions are not available (list value)
#ignore_extensions =


[nova]

#
# From tobiko
#

# Default SSH key to login to server instances (string value)
#key_file = ~/.ssh/id_ecdsa

# Default SSH key type to login to server instances (string value)
#key_type = ecdsa

# Timeout (in seconds) for establishing connection to advanced_vm (floating point value)
#advanced_vm_connection_timeout = 1500.0

# Timeout (in seconds) till advanced_vm is reachable (floating point value)
#advanced_vm_is_reachable_timeout = 900.0

# Timeout (in seconds) till cloud-init based server is reachable (floating point value)
#cloudinit_is_reachable_timeout = 600.0


[octavia]

#
# From tobiko
#

# Interval to check for status changes, in seconds. (integer value)
#check_interval = 5

# Timeout, in seconds, to wait for a status change. (integer value)
#check_timeout = 360

# The user we should use when we SSH the amphora. (string value)
#amphora_user = cloud-user


[ping]

#
# From tobiko
#

# Number of ICMP messages to wait before ending ping command execution (integer value)
#count = 1

# Max seconds waited from ping command before self terminating himself (integer value)
#deadline = 5

# If False it will not allow ICMP messages to be delivered in smaller fragments (string
# value)
#fragmentation = <None>

# Seconds of time interval between consecutive before ICMP messages (string value)
#interval = 1

# Size in bytes of ICMP messages (including headers and payload) (integer value)
#packet_size = <None>

# Maximum time in seconds a sequence of ICMP messages is sent to a destination host
# before reporting as a failure (integer value)
#timeout = 300.0


[podified]

#
# From tobiko
#

# Openshift project that includes the Openstack resources (string value)
#osp_project = openstack

# Name of the OpenShift project which will be used to run PODs with tobiko background
# commands, like e.g.`tobiko ping` (string value)
#background_tasks_project = tobiko

# Contaniner image used to run background tobiko commands like e.g. `tobiko ping` in the
# POD. (string value)
#tobiko_image = quay.io/podified-antelope-centos9/openstack-tobiko:current-podified

# Container image to run iperf3 client or server in the backgroun in POD. It can be any
# image which provides iperf3 but it should be in version 3.17 at least as this version
# supports "--json-stream" option required by Tobiko. (string value)
#iperf3_image = quay.io/podified-antelope-centos9/openstack-tobiko:current-podified

# Defines how long Tobiko will wait until POD with the background command (like tobiko
# ping) will be `Running`. In most cases, if tobiko image is already in the local
# registry it will need just few seconds to start POD but if image is not yet cached
# locally it may take a bit longer time to download it. (integer value)
#tobiko_start_pod_timeout = 100

# List of tolerations that have to be applied to the tobiko background pod. It is hence
# a list of dictionaries. No nested disctionaries can be used. The list has to be bound
# by [] and each dict has to be bound by {}. Example: [{effect: NoSchedule, key:
# testOperator, value: true}, {effect: NoExecute, key: testOperator, value: true}] (list
# value)
#tobiko_pod_tolerations = []

# Extra network interface that needs to be attached to the tobiko background pod.
# (string value)
#tobiko_pod_extra_network = <None>

# Configuration that has to be added to the tobiko background pod in order to select a
# specific OCP node. The provided value has to be a non-nested dictionary without any {}
# bouds. Example: kubernetes.io/hostname:worker-3 (dict value)
#tobiko_pod_node_selector =


[rhosp]

#
# From tobiko
#

# TCP port of SSH server on overcloud or EDPM compute hosts (integer value)
# Deprecated group/name - [tripleo]/overcloud_ssh_port
#ssh_port = <None>

# Default username used to connect to overcloud or EDPM compute nodes (string value)
# Deprecated group/name - [tripleo]/overcloud_ssh_username
#ssh_username = <None>

# SSH key filename used to login to Overcloud or EDPM compute nodes (string value)
# Deprecated group/name - [tripleo]/overcloud_ssh_key_filename
#ssh_key_filename = ~/.ssh/osp_ssh_key

# cloud name to be used for loading credentials  (string value)
# Deprecated group/name - [tripleo]/overcloud_cloud_name
#cloud_name = overcloud

# Default IP address version to be used to connect to overcloud or EDPM compute nodes
# (integer value)
# Deprecated group/name - [tripleo]/overcloud_ip_version
#ip_version = <None>

# path to where to export tripleo inventory file (string value)
#inventory_file = .ansible/inventory/tripleo.yaml

# OSP env was done with an external load balancer (boolean value)
#has_external_load_balancer = false

# whether Ceph RGW is deployed (boolean value)
#ceph_rgw = false

# longest allowed single break time during the background connectivity tests like e.g.
# those using iperf3 (in seconds) (integer value)
#max_traffic_break_allowed = 0

# longest allowed total break time during the background connectivity tests like e.g.
# those using iperf3. This option represents total time when connetion was not working.
# For example it could be: not working for 3 seconds, then working for 60 seconds and
# then again not working for another 10 seconds. In such case this total break time
# would be 13 seconds. (integer value)
#max_total_breaks_allowed = 0

# maximum number of unreplied pings during the background ping tests. (integer value)
#max_ping_loss_allowed = 10


[shell]

#
# From tobiko
#

# Default shell command used for executing local commands (string value)
#command = /bin/sh -c

# Default sudo command used for executing commands as superuser or another user (string
# value)
#sudo = sudo


[shiftstack]

#
# From tobiko
#

# local clouds file path (string value)
#local_clouds_file_path = .tobiko/shifstack/clouds.yaml

# remote clouds file path on undercloud-0 host (string value)
#remote_clouds_file_path = ~/clouds.yaml

# Keystone credentials cloud name (string value)
#cloud_name = shiftstack

# Path to the RC file used to populate OS_* environment variables (list value)
#rcfile = ./shiftstackrc


[ssh]

#
# From tobiko
#

# Logout debugging messages of paramiko library (boolean value)
#debug = false

# Default SSH client command (string value)
#command = /usr/bin/ssh

# Default SSH port (string value)
#port = <None>

# Default SSH username (string value)
#username = <None>

# Default user SSH configuration files (list value)
#config_files = ssh_config,.ssh/config

# Default SSH private key file(s) wildcard (list value)
#key_file = .ssh/id,~/.ssh/id_dsa,~/.ssh/id_rsa,~/.ssh/id_ecdsa,~/.ssh/id_ed25519

# Set to False to disable connecting to the SSH agent (boolean value)
#allow_agent = false

# Set to True to turn on compression (boolean value)
#compress = false

# SSH connect timeout in seconds (floating point value)
#timeout = 15.0

# Maximum number of connection attempts to be tried before timeout (integer value)
#connection_attempts = 120

# Minimal seconds to wait between every failed SSH connection attempt (floating point
# value)
#connection_interval = 5.0

# Time before stopping retrying establishing an SSH connection (integer value)
#connection_timeout = 200.0

# Default SSH proxy server (string value)
#proxy_jump = <None>

# Default proxy command (string value)
#proxy_command = <None>


[testcase]

#
# From tobiko
#

# Timeout (in seconds) used for interrupting test case execution (floating point value)
#timeout = <None>

# Timeout (in seconds) used for interrupting test runner execution (floating point
# value)
#test_runner_timeout = <None>


[topology]

#
# From tobiko
#

# List of hostname nodes (list value)
#nodes = <None>

# Default SSH key to login to cloud nodes (string value)
#key_file = <None>

# Default username for SSH login (string value)
#username = <None>

# Default port for SSH login (string value)
#port = <None>

# Limit connectivity to cloud to IPv4 o IPv6 (string value)
# Possible values:
# '' - <No description provided>
# 4 - <No description provided>
# 6 - <No description provided>
#ip_version = <None>

# Regex to be used to parse date and time from the OpenStack services' log lines.
# (string value)
#log_datetime_pattern = (\d{4}-\d{2}-\d{2} [0-9:.]+) .+


[tripleo]

#
# From tobiko
#

# hostname or IP address to be used to connect to undercloud host (string value)
#undercloud_ssh_hostname = undercloud-0

# TCP port of SSH server on undercloud host (integer value)
#undercloud_ssh_port = <None>

# Username with access to stackrc and overcloudrc files (string value)
#undercloud_ssh_username = stack

# SSH key filename used to login to Undercloud node (string value)
#undercloud_ssh_key_filename = <None>

# Undercloud RC filename (list value)
#undercloud_rcfile = ~/stackrc

# undercloud cloud name to be used for loading credentials from the undercloud clouds
# files (string value)
#undercloud_cloud_name = undercloud

# Path to cacert file that can be used to send https request from the undercloud (string
# value)
#undercloud_cacert_file = /etc/pki/tls/certs/ca-bundle.trust.crt

# Overcloud RC filenames (list value)
#overcloud_rcfile = ~/overcloudrc,~/qe-Cloud-0rc

# Name of network used to connect to overcloud nodes (string value)
#overcloud_network_name = <None>

# Dictionary with the node groups corresponding to different hostname prefixes (dict
# value)
#overcloud_groups_dict = cmp:compute,ctrl:controller

# Wheter background services, like e.g. ping or iperf3 should be run directly from the
# undercloud node (default) or using POD on the OCP cluster. The latter is useful e.g.
# for the data plane adoption jobs when background ping should be run from the POD even
# before adoption but it requires access to the OpenShift cluster API. (boolean value)
# Deprecated group/name - [tripleo]/run_background_ping_in_pod
#run_background_services_in_pod = false
